BRADRAD®
Bradrad® precision tools drill and deburr from 1/4" to 4", or 5.5 to 100mm diameter, in material thicknesses up to 10mm. Designed for industrial applications, each step produces accurate, parallel holes with a small clearance on the nominal diameter. It positively deburrs the entry side as the hole is drilled, and if the work can be reversed, both sides.
One ‘S’ Type Bradrad® can drill eleven different diameters, while the ‘A’ Type can drill nine. The Bradrad® can be adapted for use on CNC machines.
Industrial Application Examples:
• Steel fabricators and engineers - to replace punches and dies, and milling and trepanning on short-run or prototype work, particularly where material is over 1/16" thick
• Jig and tool makers
• Aircraft manufacturers
• Car body repairs
• Electricians
• Plumbers and gas fitters
S TYPE
‘S’ Type Bradrad® drills are used to machine a wide variety of materials and for many ...
A TYPE (HSS Cobalt)
‘A’ Type Bradrad® drills incorporate a detachable centre drill and the first diameter ...
B TYPE (HSS Cobalt)
‘B’ Type Bradrad® drills incorporate a detachable centre drill, and the first diameter ...
F TYPE (HSS Cobalt)
‘F’ Type Bradrad® drills require a pilot hole which can be produced by an ‘A’ or ‘B’ ...
SPECIAL APPLICATION | SAWBORER (HSS Cobalt)
Sawborer Bradrad® drills have been developed for opening out bores of tungsten carbide tipped ...
SPECIAL APPLICATION | ELECTRICAL
A range of sizes specially designed for work with conduits.
SPECIAL APPLICATION | PIPE TOOLS
BP1 - for drilling the clearance holes for BSP fittings in material up to 5mm thick. BP2 - ...
SPECIAL APPLICATION | PG TYPE
PG Bradrad® drills are made from high speed steel for use in pedestal drills or industrial ...
